Car Racks

- Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport - Padding is cut-resistant, water resistant and UV-stable - Non-slip protection (padded) - Quick-access tailgate release - Soft lining on the truck side of the pad, won't damage paint - Size: full-size truck (XL) or mid-size truck (ML) - Specifically designed for pickup trucks with curved tailgates - ML, Fits tailgates 130cm/50'' wide - XL, Fits tailgates 160cm/60'' wide

Easy-to-install foot for Thule Edge roof racks, for vehicles with integrated fixed points, T-profile, or custom install rack attachment points. - Easy-to-install roof rack feet - For Thule Edge roof rack systems - For vehicles with integrated fixed points Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with integrated fixed points, T-profile, or custom install rack attachment points - Secures to vehicle with Thule One-Key locks (sold separately) - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Add Thule Fixpoint Kit Cover (sold separately) for a quick rack mounting solution - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle

This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust-resistant steel design. Features: - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars, or factory racks (sold separately) - Primary watercraft: Kayak

Premium aerodynamic load bar for an exceptionally quiet ride and easy installation of accessories. 1-pack. - Aerodynamic and quiet - Sliding functionality for easy loading - Easy to install and use Features: - Load bar for Thule Edge roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - Designed and developed for swift click-in assembly with Thule Edge load carrier feet, providing an integrated, low-profile roof rack and a custom look - Smooth installation and removal of accessories thanks to upper T-track with QuickAccess interface - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length Specifications: - Loading width: 36-40 in - Length (in): 41 - Maximum load: lb/75 kg. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.

If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.

- Adapts female specific and full suspension frames to be easily hung on car rack carriers - Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit - Makes transporting an unconventional frame by car rack much easier - Extends from 21.5" to 31" eye to eye

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.

Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.

Freedom is a versatile lightweight rack that makes loading and unloading bikes quick and easy. Foldable upright arms securely clamp top or seat tubes with soft, non-marring pads. - Ratcheting straps keep bike stable and secure and adjust to fit most bikes - Standard wheel scoop fits up to 2.25" tires. Fat wheel trays are available separately - Adjustable to work with most bikes - Fits 1 1/4- and 2-inch hitches - Can hold two bikes weighing up to 60 lbs each - Rack weighs 20 lbs - Made in the USA

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

The HighNoon FC is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders. - Compatible with bikes with fenders - Compatible with bikes without fenders - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2" variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 50" - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and the adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Rack weight 39 lbs (shipping weight 49 lbs) - Fit Memo- For cargo vans (vehicles with flat backs), Depending on hitch placement, handlebar width, an 8" Hitch Extension may be required for wide mountain bike handlebars to clear the doors.

The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes ONLY, up to 60 lbs per tray (120 lbs total). 1.25" variant is NOT compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door

The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2” variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door

This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.

The little brother of the MonoRail, the MonoRail Solo is perfect for those who do not need all of the capacity but still want the versatility of it’s larger brother. Superlight with a 25 lbs rack weight, the solo is our easiest rack to take on and off a vehicle. Out of the box the MonoRail family has the widest carrying capacity of our line up, due to their ability to fit up to a 5” fat bike tire. The solo also has the added versatility of allowing for both 1.25” and 2” hitches out of the box. - Carries 1 bike, up to 60 lbs. Expandable to 2 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Fits both 1.25” and 2” hitches with adapter sleeve (included) & anti-wobble bolt - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 25 lbs (shipping weight 35 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

"What if?" - When we asked the question, the Piston Pro X was the answer. Genuine Kashima coated hydro-pneumatic arms make loading and unloading a one-handed operation. Touchless arms grab the tires, keeping your bike secure, and your paint pristine. Low-profile integrated LED tail lights synchronize with your vehicle, providing enhanced rear visibility and on-road safety. These and many other features culminate in a rack designed, built, and tested to push the envelope and provide you with unparalleled ease of use, peace of mind, and lasting value. This is the Piston Pro X. OneTap Hit the levers and watch as the cradle arms open automatically into position. Kuat's new patented hydro-pneumatic OneTap levers make loading your bikes easy, and fun. FastFit Wheel Chock System It's called FastFit for a reason: This patent-pending feature changes wheel sizes from 18" to 29" in seconds, tool-free. QuickConnect QuickConnect lets you expand or consolidate your Piston from 2 to 4 bikes in a matter of minutes. Current record: 44s. Foot & Hand Pivot Fold your Piston up or down with the convenient foot pedal. Have a fully loaded 4-bike? Easy Assembly EasyClip patent-pending tray tabs make assembling your Piston quick and painless. Spend all that time you save riding your bike. 99% Metal Construction Just because it's sexy doesn't mean it isn't heavy duty. The Piston Pro X is all metal and ready to take on all the adventure you can throw at it. TIGER DRYLAC The Piston Pro X is finished with TIGER DRYLAC, a class-leading powdercoat designed for the unforgiving conditions of both day-in, day-out commutes and epic road trips alike. Hard Wearing Hardware Igus bushings and 308 Stainless Steel, 750-hour salt spray automotive-grade hardware keep the burly, long-lasting trend going. This rack will stand up to years of demanding mileage and use. Liquid Painted Logo A little cherry on top: A liquid painted 3D logo finishes out the rack aesthetic adding dimension and style. LED Taillights QuickConnect patented trays and Add-Ons are prewired. LED lighting will connect and sync automatically when assembled. Connects to the vehicle via the included flat 4-pin connector. Magnetic Cable Docking Set up is as easy as snapping in the magnetic cable, and plugging the 4-Pin into your vehicle's trailer outlet. No confusing diagrams or head scratching routing. POGO Pins QuickConnect patented Add-Ons are pre-wired. Simply install the Add-On and the LED lightning will connect and sync automatically. Cable Management Provided magnetic clips let you manage the LED cable, keeping everything tidy and out of the way. Locking Security Tool No more Where's Waldo in your glovebox: The multi-purpose security tool locks in place at the end of the rack, ensuring it's always there when you need it. Flatlock Hitch Cam The patent-pending Flatlock hitch cam keeps things stable and its tamper-resistant head keeps it secure. Plus, we've added a stainless steel hitch lock for double security and additional peace of mind. High-Strand 12mm Cable Semi-integrated ultra flexible high strand 12mm cable, with plenty of length for the wheels and frames of all your bikes. The soft touch outer coating is also easy on your bikes.

Transport your rides and save your back, too, with Hollywood's Sport Rider rack that carries up to four bicycles. Simply set any bike into the wheel holders (that are nice and low for easy bike mounting), then slide the padded universal clamp over the frames to secure the bikes. This great rack also includes Hollywood's No-Wobble system that prevents rack sway and holds your bikes steady even when the road is less than ideal. For even more convenience, the Sport Rider is designed as a 2+2, so you can use it as either a 4-bike or 2-bike rack. And, it folds down when not in use for easy transport, storage, and cargo door access. - Capacity: Four Bikes/180 lbs (max. 45 lbs per bike) - Hitch Size: 2-inch only - Not to be used on any trailer, fifth wheel, or towed vehicle

- Capacity: Two Bikes (Max. 80 lb per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame hooks - Patented "No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools - Folds flat against car when not in use - Tilts down for easy cargo door access - Space between bikes: 10 - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - For step through bicycles you will need to also purchase a Bike Adapter - Rack Weight: 58 lb - Limited Lifetime Warranty - Not to be used on any trailer, fifth wheel or towed vehicle

Hollywood's Sport Rider SE2 2-Bike Add-on Kit lets you carry an additional 2 bikes on your next adventure. It connects easily by sliding the add-on kit into the base unit (sold separately), inserting the attachment pin & clip, then tightening the lever. - Weight: 45 lbs - Capacity: 2 bikes, max 45 lbs per bike - Fits models HR1450, HR145R, and HRT220 - Space between bikes: 10 inches - Not to be used on any trailer, fifth wheel, or towed vehicle

Hollywood's SportRider SE2 rack uses padded universal top clamps and adjustable wheel holders to safely carry 2 bikes. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. The rack folds up when not in use, tilts down for easy cargo access, and includes a keyed-alike locking hitch pin and security cable. Plus, with an add-on kit (sold separately), the Sport Rider SE2 can bring along 4 bikes for your adventures. • Hitch Size: 2 inches • Max tire width: 3 inches • Max bike wheel base: 60 inches • Max weight capacity: 45 lbs per bike • Weight: 45 lbs • Not to be used on any trailer, fifth wheel, or towed vehicle

The Sport Rider Bike Rack for Electric Bikes is our hitch bike rack designed specifically to carry electric bikes with any sized tire up to 5" wide. This bike rack can carry up to 2 electric bikes or standard bikes. If you're looking for an e-bike rack that works with bikes with fenders, look no further than the Sport Rider SE for Electric Bikes. This durable, strong bike rack includes new universal extra heavy-duty wheel holders for heavy load-carrying capacity. As with the Sport Rider SE, this hitch-mounted bike rack can fold flat against the car when not in use and can be tilted for easy access to the cargo area. Also includes a keyed-alike locking hitch pin, 8' security cable, and locking frame to keep your rack and bikes secure during travel. Comes with a 2" adapter over a 1 1/4" hitch.

Nothing beats Hollywood's Trail Rider for fast, simple loading/unloading of bikes. It fits almost any style of bike using a padded universal top clamp and adjustable wheel holders. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. Plus, this rack folds into a thin profile for garage storage and includes Velcro wheel straps that also fold easily when not in use. - Hitch Size: fits both 1-¼ and 2-inch - Max bike wheel base: 60 inches - Max tire width: 3 inches - Not to be used on any trailer, fifth wheel or towed vehicle - Max weight capacity: 50 lbs per bike - Optional locking hitch pin and cable sold separately

The Sport Rider Trike Adapter fits most recumbent trikes (NOT suitable for adult/industrial style trikes). Track width up to 32" with standard Sport Rider wheel holders, or 36" track width using extra wide Sport Rider wheel holders.

- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish

The EVOC TAILGATE PAD is our pickup pad for safe bike transport on your pickup-truck for up to 6 bikes. It combines secure bike fixation and tailboard damage protection in one piece. Made from durable 600 weight Denier, we added a polyurethane coating to make it resistant for the weather that you'll inevitably encounter while you're out shredding. The updated Tailgate pad is equipped with molded foam separations blocks and straps to keep your toys from touching. We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame. Features - Padded pickup tailgate protection - Ideal for shuttling bikes - particularly MTBs - Quick access to tailgate release handle - Fold-Away flap for rear camera (Olive/Black and Black/Olive only) Specifications - Weight: 1850 g (Size M/L), 2300 g (Size XL) - Material: P 600/D PU coated, Tarpaulin - Black/Olive & Olive/Black Sizes: M/L- 136 x 85 x 2 cm , XL 160 x 100 x 2 cm - Colors: Black/White, Black/Olive, Olive/Black Sizes Two sizes are available (M/L & L/XL). Use the M/L for trucks like the Toyota Tacoma, Nissan Frontier, Chevrolet Canyon, Ford Ranger and other compact trucks. Use the L/XL for full-size trucks like the Toyota Tundra, Nissan Titan, Chevrolet Silverado, Ford-F150, Dodge Ram, etc.

Designed for safe transport of up to two bikes on your pickup. Securely mount your bikes while protecting your tailgate from damage. Ideal for MTBs Specifications 770g, 83 x 57 x 2cm We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame.

The TAILGATE PAD DUO is a solution for safe pickup-truck bike transport: it fixes your bikes safely and protects your truck´s tailgate from damage. - Allows the secure transport of two bikes - Improved padding to protect the frame - Needs to be fastened to both sides of the tailgate door